This profile has been claimed by the business owner or representative.
Jandy 4717 NeverLube Valve, Standard Diverter
About this business
The Never Lube Valve is completely maintenance-free and built from the toughest CPVC material. It can withstand extreme chemical and temperature fluctuations without ever leaking, cracking or breaking. It's available in 1.5" x 2", 2" x 2.5", and 2.5" x 3" sizes for easy use in conjunction with the Jandy Valve Actuator for automatic operation. The large 2-port and 3-port diverter valves are both 2.5" x 3", making them the largest valves on the market. Features Large 2.5" x 3" dimension designed to easily connect with Jandy P... read more
Leaking Valve I installed this diverter valve per the instructions (removed the "guts" during gluing). Verified that the sealing surfaces of the valve housing are not compromised by any excess glue or anything. All the PVC pipe joints are watertight but the valve has a slight leak out of the closed off port seal. Will try to rectify through troubleshooting as I don't want to have to repipe the section that contains the valve as that would mean needing a new valve and pump and filter replacement unions plus the PVC pipe and f... read more
Valve As advertised. Have not installed it yet
One Star Arrived on time but it is leaking after installation
Seems like it may be built a bit tougher Jandy version is very similar to Hayward. Seems like it may be built a bit tougher. I'll find out this winter
Design results in cavitaion noise This flow valve creates turbulence that results in loud turbulent water noise from cavitation. Had a different Jandy 3 way valve before that had union couplings and did not make noise.. It's so loud I had to almost put it in a shutoff position as fear the neighbors would complain.
Works perfect! I pulled out the guts of these and put them inside the old valves, no more leaking, no sawing of PVC, and no mess
No clogs Water flows through this valve like s#$%^ through a goose. It never clogs. I'm positive about that.
2" male pipe OR 2.5" female fittings attach to Jandy - ether end Good enough for now, I’ll let you know more in 10 years. By way of clarification: The 2 inch pipe you glue to the inside of the valve. If you need too, you can instead (ether end) use a 2.5" female fitting end to fit over the outside of the valve in/out. Inside with 2" pipe, outside with 2.5" fitting. I could not get any information as to why the Jandy valves and valves said both sizes on the description.
I purchased two valves. Installed both. BOTH LEAK ... I purchased two valves. Installed both. BOTH LEAK! Now I have to take all the new PVC apart and start all over. Added expenses. Very poor product!
Frequently asked questions about Jandy 4717 NeverLube Valve, Standard Diverter
How is Jandy 4717 NeverLube Valve, Standard Diverter rated?
Jandy 4717 NeverLube Valve, Standard Diverter has a 4.7 star rating with 289 reviews.
When is Jandy 4717 NeverLube Valve, Standard Diverter open?
Jandy 4717 NeverLube Valve, Standard Diverter is closed now. It will open tomorrow at 9:00 a.m.